Seed treating systems
Seed Treater SAP-20

Seed Treater SAP-20 is designed for accurate application of liquid treatment and liquid inoculum to different types of seeds. With its help, you can process seeds of cereals, legumes, flax, rice, corn and soy. Optimum flow rate up to 20 t /h. 
The applicator is installed on an auger or belt loader, which can be supplied as a set, and can also be attached underneath overhead seed bin. The seed treating machine consists of an applicator, a mixer, a mix tank with hydraulic drive.

Mobile Auger 
seed treater PSH-3

The mobile seed treating machine is designed for treating all types of seeds (except for sunflower seeds) with liquid products in accordance with “List of pesticides, agrochemicals allowed for use”. Treater is recommended for wide use in large farms over 5,000 ha, small farms up to 100 ha per season.

SATEC CONCEPT® 3/100

Mixing chamber d = 1000 mm. Cover and flap stator and overhand aspiration. Rotary strapping air pressure (create hermiticity between the rotor and strapping).

SATEC CONCEPT® 1/25 and 1/50

Industrial Batch Seed Treaters

SATEC CONCEPT® ML 2000

Industrial Batch Seed Treaters

G3 System 1100 DS

This treating system consists of: G3 Insert, Mix and Treat liquid product delivery unit, T6 liquid product delivery unit, control panel with a seed sensing switch.

The G3 and the G3 Insert are made of stainless steel. The fittings inside are brass and stainless steel. There are 2 reducer cones included to control seed flow from an overhead bin. This system has 2 Mixers. The M1 Mixer mounts under the G3&G3 Insert. The M2 Mixer hangs off the end of the take away conveyor used to take the treated seed away. These are both made of the same stainless steel as the G3 and Insert.

The Mix and Treat has a 120 litre poly tank on a stand with pumps and motor mounted below. The pumps will cycle the liquid product to mix and restore it to proper suspension. When this is accomplished you can set the unit to pump the seed treatment to the G3 Seed Treater and or the G3 Insert. The T6 liquid product delivery unit has 30 litre poly tank on a frame. The pump mounts on the frame as well. The T6 and the control panel will mount on the Mix and Treat Stand.

At the end of the treating season flush the unit with water and then winter safe the pump. This equipment is not compatable with peat based products.

The control panel is in a stainless steel box. The panel consists of switches to turn the system on and off and to control the application of the seed treatment. This system will operate on manual or automatic.

G40 System Mix & Treat 120

This treating system consists of our patented G40 Seed Treater, G40 DS insert, TX8E auger, and 2 Mix and Treat liquid product delivery units.

The G40 and G40 DS insert are made of stainless steel body. The fittings inside are brass and stainless steel.

The TX8E auger is 4.92 meters long and has an 20.32 cm tube diameter. There is a shield at the top to guard the pulleys. The bottom has a cage that covers all exposed flighting. The spout at the discharge is designed to keep the G40 hanging vertically straight. We have put a seed gate at the bottom of the auger to control the seed flow through the auger. A gate gauge strip is on the auger to set the seed flow. The motor that comes with this auger is 1.5 hp. There is a forward/reverse switch wired into it. This switch is wired 220v, and a cord is provided, but you will need to attach a plug that matches your power supply. The System has 1 Mixer. The m4 mixer hangs off the end of the take away conveyor.

The Mix and Treat has 2 x 120 litre poly tanks on a stand with pumps and motor mounted below. These units are plumbed to draw the liquid product into the tank or send it to the treater. The pump will cycle the liquid product to mix and restore it to proper suspension. When this is accomplished you can set the unit to pump the seed treatment to the G40 Seed Treater. Note – you cannot transfer liquid product and treat liquid product at the same time. It is necessary to do one action at a time. At the end of the treating season flush the unit with water and then winter safe the pump.

G3 System Mix and Treat 120

This treating system consists of our patented G3 Seed Treater,TX7E auger, and a Mix and Treat liquid product delivery unit. The G3 is made of stainless steel body. The fittings inside are brass and stainless steel.

The TX7E auger is 3.692 meters long and has a 17.78cm tube diameter. There is a shield at the top to guard the pulleys. The bottom has a cage that covers all exposed flighting. The auger flighting is poly cupped. The spout at the discharge is designed to keep the G3 hanging vertically straight. We have put a seed gate at the bottom of the auger to control the seed flow through the auger. A gate gauge strip is on the auger to set the seed flow. The motor that comes with this auger is 1.5 hp. There is a forward/reverse switch wired into it. This switch will work 110v or 220v, a wiring diagram is provided.

The System has 1 mixer. The M2 mixer mounts under the G3 seed treater.

The Mix and Treat has a 120 litre poly tank on a stand with pumps and motor mounted below. This unit is plumbed to draw the liquid product into the tank or send it to the treater. The pumps will cycle the liquid product to mix and restore it to proper suspension. When this is accomplished you can set the unit to pump the seed treatment to the G3 Seed Treater. Note – you cannot transfer liquid product and treat liquid product at the same time. It is necessary to do one action at a time. At the end of the treating season flush the unit with water and then winter safe the pump.

MOBILE-OPTIMA 5

Unique mobile systems for seeds handling and treating. Weeding, calibrating and dressing seeds mobile line with 5 T per hour