G40 System Mix & Treat 120

This treating system consists of our patented G40 Seed Treater, G40 DS insert, TX8E auger, and 2 Mix and Treat liquid product delivery units.

The G40 and G40 DS insert are made of stainless steel body. The fittings inside are brass and stainless steel.

The TX8E auger is 4.92 meters long and has an 20.32 cm tube diameter. There is a shield at the top to guard the pulleys. The bottom has a cage that covers all exposed flighting. The spout at the discharge is designed to keep the G40 hanging vertically straight. We have put a seed gate at the bottom of the auger to control the seed flow through the auger. A gate gauge strip is on the auger to set the seed flow. The motor that comes with this auger is 1.5 hp. There is a forward/reverse switch wired into it. This switch is wired 220v, and a cord is provided, but you will need to attach a plug that matches your power supply. The System has 1 Mixer. The m4 mixer hangs off the end of the take away conveyor.

The Mix and Treat has 2 x 120 litre poly tanks on a stand with pumps and motor mounted below. These units are plumbed to draw the liquid product into the tank or send it to the treater. The pump will cycle the liquid product to mix and restore it to proper suspension. When this is accomplished you can set the unit to pump the seed treatment to the G40 Seed Treater. Note – you cannot transfer liquid product and treat liquid product at the same time. It is necessary to do one action at a time. At the end of the treating season flush the unit with water and then winter safe the pump.